Why Does My Shredder Only Work in Reverse? | HP Office Supply Support

Why Does My Shredder Only Work in Reverse?

Overview

If your shredder operates in Reverse mode but does not shred normally in the Forward or Auto position, the issue may be related to the auto run sensor or paper placement.


Basic Troubleshooting

  1. Verify there is no paper inserted in the shredder opening.
  2. Turn the shredder off and back on again.
  3. Place the paper directly into the center of the shred opening during testing.
  4. Check for small pieces of paper or debris inside the shredder throat area.
  5. If necessary, unplug the shredder and carefully remove any visible paper fragments.

Additional Information

Many shredders use an automatic paper sensor located near the center of the shred opening.

If the sensor is blocked or not triggered correctly, the shredder may only function in Reverse mode.


Still Need Assistance?

If the issue continues after completing the steps above, click the Submit a Ticket button below to contact HP Office Supply Support.

Please include the following information in your request:

  • Product model number
  • Serial number or lot number
  • Date of purchase
  • Detailed description of the issue

Providing this information helps our support team assist you more efficiently.