Shredder Will Not Run | HP Office Supply Support

Shredder Will Not Run

Overview

If your shredder is not running or is not responding when attempting to shred paper, follow the troubleshooting steps below before contacting support.


Basic Troubleshooting

  1. Verify the shredder is securely connected to a working power outlet.
  2. Confirm the power switch is turned on and set to the correct operating mode.
  3. Empty the waste bin if it is full and ensure the bin is properly installed.
  4. Check for jammed paper inside the shredder opening and carefully remove any visible obstruction.
  5. Allow the shredder to cool down if it recently stopped during extended use. Some shredders include thermal protection and may temporarily stop operating until cooled.
  6. Verify the shredder head is properly aligned with the waste bin.
  7. Turn the shredder off for approximately 60 seconds, then power it back on and test again.

Additional Information

Some shredder models include safety sensors or overload protection features that may temporarily prevent operation.

Please refer to your product manual for model-specific instructions.


Still Need Assistance?

If the issue continues after completing the steps above, click the Submit a Ticket button below to contact HP Office Supply Support.

Please include the following information in your request:

  • Product model number
  • Serial number or lot number
  • Date of purchase
  • Detailed description of the issue

Providing this information helps our support team assist you more efficiently.