Laminator Not Heating Properly | HP Office Supply Support

Laminator Not Heating Properly

Overview

If your laminator is not heating properly or is not laminating correctly, follow the troubleshooting steps below before contacting support.


Basic Troubleshooting

  1. Verify the laminator is connected to a working power outlet and powered on.
  2. Allow the laminator sufficient warm-up time before use. Some models may require several minutes to reach operating temperature.
  3. Confirm the ready indicator light is illuminated before inserting a pouch.
  4. Verify the laminating pouch is loaded correctly and within the supported thickness specifications for the product.
  5. Remove any jammed pouch material carefully and allow the laminator to cool if necessary before retrying.
  6. Do not force thick materials or multiple items through the laminator at the same time.
  7. Turn the laminator off for approximately 60 seconds, then restart the unit and test again.

Additional Information

Some laminator models include thermal protection features that may temporarily pause heating during extended use.

Please refer to your product manual for model-specific instructions and supported pouch thickness recommendations.


Still Need Assistance?

If the issue continues after completing the steps above, click the Submit a Ticket button below to contact HP Office Supply Support.

Please include the following information in your request:

  • Product model number
  • Serial number or lot number
  • Date of purchase
  • Detailed description of the issue

Providing this information helps our support team assist you more efficiently.